If the belt stops before it reaches the buckle, tilt the
latch plate and keep pulling until you can buckle it.
Pull up on the latch plate
to
make sure it is secure.
If the belt is not long enough, see “Safety Belt
Extender” at the end
of
this
section. Make sure the
release button
on
the buckle
is
positioned
so
you
would be able to unbuckle the safety belt quickly if
you ever had to.
..
,I
’.
8.
I
t
3.
To
make
the lap part tight, pull down
on
the
buckle
end
of
the
belt as-you pull up on the shoulder
part.
1-28
i
To Next Page
Loading...
