Setting Cruise Control
If
you leave your cruise control switch on when
you’re not using
cruise,
you might hit
a
button
and go into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch
off
until you want to use
it.
The cruise control buttons are located on the center of
the steering wheel.
1.
Press the cruise control
ON/OFF
button.
Resuming a Set Speed
Suppose you set your cruise control at a desired speed
and then you apply the brake.
This,
of course, shuts
off
the cruise control. But you don’t need to reset it. Once
you’re going about
25
mph
(40
km/h)
or more, you can
press the cruise control ACCEL
RESUME
button for
about half a second.
You’ll go right back up to your chosen speed and
stay there.
If
you press the ACCEL
RESUME
button longer than
half a second, the vehicle will keep going faster until
you release the switch or apply the brake.
So
unless you
want to go faster, don’t hold down the
ACCEL
RESUME
button.
2.
Get up to the speed you want.
3.
Press the SET DECEL button and release it.
4.
Take your foot
off
the accelerator pedal.
2-34
To Next Page
Loading...
