TRAF
(Traffic):
TRAF will appear on the display
if
the
tuned station broadcasts traffic announcements.
To
receive the traffic announcement from the tuned station,
press this button. Brackets will be displayed around
TRAF and when a traffic announcement comes on the
tuned radio station you will hear it.
If
the current tuned station does not broadcast traffic
announcements, press this button and the radio
will seek
to
a station that does. When the radio finds a
station that broadcasts traffic announcements, it will
stop. Brackets will be displayed around TRAF and when
a
traffic announcement comes on the tuned radio
station you will hear it.
If
no station is found,
NO
TRAF
will appear on the display.
Traffic Interrupt Feature:
Your radio can interrupt the
play of a cassette, or CD. Press the TRAF button.
The radio will seek
to
a station that broadcasts traffic
announcements. When the radio finds a station
that broadcasts traffic announcements, it will stop.
Brackets around TRAF will appear on the display. When
a traffic announcement comes on the station that was
found, you will hear it. When the traffic announcement is
over, the radio will resume play of the cassette, or
CD.
If
no station is found, NO TRAF will appear on the
display.
Playing a Cassette Tape
Your tape player is built
to
work best with tapes that are
up
to
30
to
45
minutes long on each side. Tapes
longer than that are
so
thin they may not work well in
this player. The longer side with the tape visible should
face
to
the right. If the ignition is on, but the radio is
off, the tape can be inserted and will begin playing. If
you hear nothing but a garbled sound, the tape may not
be in squarely. Press the eject button, located next
to
the cassette tape
slot,
to
remove the tape and start over.
While the tape is playing, use the VOLUME, POWER,
AUDIO, AUTO EQ, and the
SEEK
controls just as
you do for the radio. The display will show TAPE and
an arrow showing which side of the tape is playing. The
tape player automatically begins playing the other
side when it reaches the end of the tape.
Your tape bias is set automatically when a metal or
chrome tape is inserted. If you want
to
insert a
tape while the ignition is off, first press the button with
the eject symbol on it or the RCL knob.
If an error appears on the radio display, the tape won’t
play because of an error. See “Cassette Tape
Messages” later in this section.
3-62
To Next Page
Loading...
