SCAN:
You can also scan through the channels within
a category by performing the following:
1.
Press the P-TYPE button. P-TYPE and the last
selected PTY will be displayed on the screen.
2. Select a category by turning the P-TYPE knob.
3.
Once the desired category is displayed, press and
hold either SCAN arrow, and the radio will begin
scanning within your chosen category.
4.
Press either SCAN arrow again to stop at a
particular station.
AM
FM (Alternate Frequency):
Alternate frequency
allows the radio
to
switch
to
a stronger station with the
same program type. Press and hold AM FM for two
seconds
to
turn alternate frequency on. AF
ON
will appear on the display. The radio may switch to
stronger stations. Press and hold AM FM again for two
seconds
to
turn alternate frequency
off.
AF OFF will
appear on the display. The radio will not switch
to
other
stations. When you turn the ignition
off and then on
again, the alternate frequency feature will automatically
be turned on.
Setting Preset
PTYs
The six numbered pushbuttons let you return
to
your
favorite PTYs. These buttons have factory PTY presets.
You can set up
to
12
PTYs (six FMl and six FM2) by
performing the following steps:
1.
2.
3.
4.
5.
Press BAND
to
select FMl or FM2.
Press the P-TYPE button
to
activate program type
select mode.
Turn the P-TYPE knob
to select a PTY.
Press and hold one of the six numbered
pushbuttons until you hear a beep. Whenever you
press that numbered pushbutton, the PTY you
set will return.
Repeat the steps for each pushbutton.
3-70