Playing a Specific
Loaded
Compact Disc
For every CD loaded, a number will appear on the radio
display. To play a specific CD, first press the CD AUX
button
to
start playing a CD. Then press the numbered
pushbutton that corresponds
to
the CD you want
to
play. A small bar will appear under the CD number that
is playing, and the track number will appear.
If an error appears on the radio display, see “Compact
Disc Messages” later in this section.
LOAD
CD
/1
(Eject):
Pressing the CD eject side
of
this button will eject a single disc or multiple discs.
To eject the disc that is currently playing, press
and release this button. To eject multiple discs, press
and hold this button for two seconds. You will hear
a beep and the light will flash
to
let you know when a
disc is being ejected.
REMOVE
CD will be displayed. You can now remove
the disc. If the disc is not removed, after 25 seconds, the
disc
will
be automatically pulled back into the receiver.
If you try
to
push the disc back into the receiver,
before the
25
second time period is complete, the
receiver will sense an error and will try
to
eject the disc
several times before stopping.
Do not repeatedly press the CD eject side of the
LOAD CD eject button
to
eject a disc after you have
tried to push it in manually. The receivers 25-second
eject timer will reset at each press
of eject, which will
cause the receiver
to
not eject the disc until the
25-second time period has elapsed.
Once the player stops and the disc is ejected, remove
the disc. After removing the disc, press the PWR
knob
off and then on again. This will clear the
disc-sensing feature and enable discs
to
be loaded into
the player again.
<<
REV (Reverse):
Press and hold this button
to
reverse quickly within a track. You will hear sound at a
reduced volume. Release it
to
play the passage.
The display will show elapsed time.
FWD
>>
(Forward):
Press and hold this button
to
advance quickly within a track. You will hear sound at a
reduced volume. Release it to play the passage. The
display will show elapsed time.
RPT (Repeat):
With repeat, you can repeat one track
or an entire disc. To use repeat, do the following:
To repeat the track you are listening
to,
press and
release the RPT button. RPT will appear on the
display. Press RPT again to turn it
off.
To
repeat the disc you are listening to, press and
hold the RPT button for two seconds. RPT will
appear
on
the display. Press RPT again
to
turn it
off.
3-73
To Next Page
Loading...
