Interior Plastic Components
Use only a mild soap and water solution on a soft cloth
or sponge. Commercial cleaners may affect the
surface finish.
Vinyl
Use warm water and a clean cloth.
Rub with a clean, damp cloth
to
remove dirt.
You
may have
to
do this more than once.
Things like tar, asphalt and shoe polish will stain
if
you don’t get them off quickly. Use a clean cloth
and vinyl/leather cleaner. See your dealer for
this product.
Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap and wipe dry with a soft cloth. Then, let
the leather dry naturally.
Do
not
use heat
to
dry.
0
For stubborn stains, use a leather cleaner. See your
dealer for this product.
Never
use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediately.
If
dirt is allowed
to
work into the finish,
it can harm the leather.
Top
of
the Instrument Panel
Use only mild soap and water
to
clean the top surfaces
of the instrument panel. Sprays containing silicones
or waxes may cause annoying reflections in the
windshield and even make it difficult
to
see through the
windshield under certain conditions.
Glass
Surfaces
Glass should be cleaned often. GM Glass Cleaner or a
liquid household glass cleaner will remove normal
tobacco smoke and dust films on interior glass. See
GM
Vehicle Care/Appearance Materials on page
5-83.
Notice:
Don’t use abrasive cleaners on glass,
because they may cause scratches. Avoid placing
decals on the inside rear window, since they
may have to be scraped
off
later.
If
abrasive cleaners
are used on the inside
of
the rear window, an
electric defogger element may be damaged. Any
temporary license should
not
be attached across the
defogger grid.
5-79
To Next Page
Loading...
