3.
With the engine running, engage the parking brake,
press the brake pedal and place the vehicle in
REVERSE
(R)
gear.
When the vehicle is placed in PARK
(P)
or in any
forward gear, the mirror(s) will return
to
normal
driving position, following a short delay.
4.
Adjust the passenger’s side and then the driver’s To change the tilt position, adjust the mirror while the
side outside mirrors
to
the desired tilt positions.
vehicle is in REVERSE (R) gear with the engine running,
These positions will be stored into memory once the
the parking brake engaged and the brake pedal
vehicle is shifted
out
of REVERSE
(R).
pressed. The new position will be saved into memory
once the vehicle is shifted
out
of REVERSE
(R).
2-34
To Next Page
Loading...
