40
7.
Push and pull the child restraint in
different directions to be sure it is
secure.
To
remove the child restraint, just
unbuckle the vehicle’s safety belt and
let it go back all the way. The safety belt
will move freely again and be ready to
work for an,adult or larger child
passenger.
Securing
a
Child
Restraint in the
Senter Rear Seat Position
Xhen you secure a child restraint in a
:enter seating position, you’ll be using
.he lap belt.
See the earlier section about the top
;trap
if
the child restraint has one.
1.
Make the belt as long
as
possible by
tilting the latch plate and pulling it
along the belt.
2.
Put the restraint on the seat. Follow
the instructions for the child
restraint.
3.
Secure the child in the child restraint
as the instructions say.
4.
Run the vehicle’s safety belt through
or around the restraint. The child
restraint instructions will show you
how.
To Next Page
Loading...
