5.
Buckle the belt. Make sure the
release button is positioned
so
you
would be able to unbuckle the safety
belt quickly
if
you ever had to.
6.
To
tighten the belt, pull its free end
while you push down on the child
restraint.
7.
Push and pull the child restraint in
different directions.to be sure it
is
secure. If the child restraint isn’t
secure, turn the latch plate over an(
buckle it again. Then see
if
it is
d
secure. If
it
isn’t, secure the restraint
in a different place in the vehicle and
contact the child restraint maker for
their advice about how to attach the
child restraint properly.
To
remove the child restraint, just
unbuckle the vehicle’s safety belt. It will
be ready to work for an adult or larger
child passenger.
Securing
a
Child Restraint in the
Right Front Seat
To
use a child restraint here, you will
need a special infant/child seat
attaching belt and the hardware that
goes with it. See the earlier section
about the top strap
if
the child restraint
has one.
41
To Next Page
Loading...
