5
filling water tank
This iron is designed
to be used with
regular tap water.
If your water is
over 12 grams
of hardness, we
recommend using
either inexpensive
bottled spring water or
mixing half tap water
with half distilled water.
Alternatively, fill directly from a
faucet holding the iron horizontally.
Make sure iron is unplugged.
If iron is over-filled wipe up excess water around
the iron before plugging the iron back in.
unplug ironswitch off open lid fill
50mL equals the max
capacity of the water tank.
Place the warm iron on the
solemate™ while it cools.
Then open lid.
Do not fill the tank past the MAX
fill line on the top of the iron.
Close the lid when done.
step 1 step 2 step 3
DO NOT
max fill line
water
recommendations
alternative filling
(turn the dial
counter clockwise)
Note: fill cup not included.
To Next Page
Loading...
