1308S20034 3 - 4
Install film roll in back of
unit
Pull the film from the top
of the roll towards the front
of the unit
Placing it between the two
white
uide rollers
Pull the film from the top
of the roll
Lift up the black film pinch
roller and slid the film
under it as shown
Place a tray in the tray
carrier
Pull the film forward ¼”
beyond edge of tray
Using both hands pull
the handle down
Pull the handle down all
the way to this position and
hold it down for ½ to 1
seconds
The film is cut at this time
Lift handle to the
upright position
Remove the sealed tray
Shown in the upright
position ready to seal
another tray
To Next Page
Loading...
Need help?
General