Olivetti Fax-Lab 210 User Manual

VI
HOW TO START AT ONCE
Connect the fax machine to the power supply
IMPORTANT
Before connecting it, remove the band that blocks the print
head carriage by pulling the flap upwards (see picture be-
low).
IMPORTANT
The plug of the power supply cable may vary from country
to country.
SETTING SOME P ARAMETERS (INDISPENSABLE FOR CORRECT FUNCTIONING)
Once the fax is connected to the power supply, it automati-
cally carries out a short test to check the functions of its
components, therefore, the following messages (usually in
English) appear on the display.
On the upper line:
AUTOMATIC RX
or, in the models with built-in telephone answering device,
the total number of messages received, in this case,"00".
AUTOMATIC RX 00
and alternating on the lower line:
CHECK PRINT HEAD
SET DATE/TIME
IMPORTANT
You need to set your language and your country for the fax
machine to work appropriately.
TO SET THE LANGUAGE AND THE COUNTRY
OF
DESTINATION
+ The display shows the language in which the messages are
displayed. For example:
ITALIANO
/ To select the desired language. For example:
ENGLISH
To confirm the setting. The display shows a country of des-
tination. For example:
EUROPE
/ To select the desired country. For example:
U.K.
If your country is not present among those shown on the
display, see the table below:
B
A

Olivetti Fax-Lab 210 Specifications

General

Brand	Olivetti
Model	Fax-Lab 210
Category	Fax Machine
Language	English