Olympia A2250 - Technical Data

26
LAMINIERGERÄT A2250 / A3250
Technical Data
Subject to change without prior notice.
A2250
A3250
Laminating system:
Hot roller
Hot roller
Working width
230 mm
330 mm
Laminating temperature
Hot lamination: up to
Hot lamination: up to
105 °C
105 °C
Cold lamination: max.
Cold lamination: max.
25 °C
25 °C
Lamination width
230 mm
330 mm
Warm-up phase
75 μm: 2 min.
75 μm: 2.5 min.
125 μm: 3 to 5 min.
125 μm: 4 to 6 min.
250 μm: 5 to 7 min.
250 μm: 7 to 9 min.
Foil thickness
75 - 250 μm
75 - 250 μm
Laminating speed:
350 mm/min.
400 mm/min.
Control lamps
4 (1 x cold lamination
4 (1 x cold lamination
( C OLD ), 3 x hot lamination
( C OLD ), 3 x hot lamination
(75 μm, 175 μm, 250 μm))
(75 μm, 175 μm, 250 μm))
Cool down phase
Approx. 15 minutes
Approx. 15 minutes
Rollers
2
2
Power supply
220 - 240 V, 50 Hz, 1.3 A
220 - 240 V, 50 Hz, 1.76 A
Power consumption
305 W
405 W
Dimensions
366 x 140 x 66 [mm]
466 x 140 x 66 [mm]
Weight
Approx. 1150 g
Approx. 1480 g
Automatic shutdown
on overheating
Yes
Yes
Jam Release
Yes
Yes