13
Electrical Safety Guidelines
Disconnect the power plug before emptying the waste paper bin, before cleaning the
device and prior to a longer period out of service.
Do not put the device into operation in the case of damage to the power cable, the power
plug or the device itself (risk of injury)!
Never exceed the recommended capacity of the power socket!
Do not complete any modifications to the power cable because it is designed for the
power supply specified.
Intended Use
Only use the PS 33T paper shredder for shredding paper!
Attempting to shred other material can lead to personal injury (e.g. through splinters
from hard material, etc.) and damage to the equipment (e.g. damage to the cutting
mechanism etc.).
The material being shredded must be dry and comply with the requirements stipu-
lated in the Technical Data.
Remove any paper clips and staples prior to shredding.
Do not shred continuous forms in this device.
Only use the device in dry, closed rooms.
To Next Page
Loading...
Need help?
General
