14
Operating Elements
Starting Up
Remove the device carefully from the packaging.
Place the paper shredder on a level surface.
Place the shredder attachment on the waste bin supplied or position it on another suit-
able bin with the aid of the pullout rails.
Assembling the shredder attachment on the waste bin supplied
Set the shredder attachment on the waste bin supplied so that it snaps into place with an
audible click.
Assembling the shredder attachment on another waste bin
Draw out the pullout on the right-hand side of the shredder attachment and then assem-
ble it on another suitable waste bin with a level surface.
Note: The shredder attachment must not wobble!
1 Shredder attachment
2 Sliding switch
3 Paper infeed with cutting
mechanism
4 Cable
5 Pullout (to place the shredder
attachment on other, larger
bins)
6 Waste bin
To Next Page
Loading...
Need help?
General
