EasyManua.ls Logo

Olympus 200 - Flash, Battery, and Remote Control Specs

Olympus 200
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rewind possible at any point with rewind button.
(Recycling time: approx. 0.2 — 3.5 sec. at normal
temperature)
Flash working range: (ISO 100 color negative film)
WIDE: 0.6m (2 ft) - 41 m (13.5 ft).
TELE: 0.6m (2 ft) 2.9m (9.5 ft).
Flash working range: (ISO100 color negative film)
WIDE:
0.6m (2 ft) - 8.2 m (26.9 ft),
TELE 0.6m (2 ft) — 5.8m (19 ft)
AUTO (Automatic flash activation in low light and
backlight)
AUTO-S
(Red-eye
reducing, in low light and backlight)
OFF(No flash)
FILL-IN (Forced activation)
MULTI (4 activation at fixed time of 1/6 sec.)
Battery check: Displayed in LCD panel
Power source: Two 3V lithium batteries (Duracell DL123A
or Panasonic CR123A, replaceable)
Dimensions: 135(W)mm x 70(H)mm x 57(D)mm
(5.3"x 2.8"x 2.2") (excluding protrusions)
Weight: 370g (13.1oz) (without batteries)
Remote control: Cordless remote control device with 1-
second and 3-second delay time.
* Specifications and design are subject to change without
notice.
Flash: Built-in flash
Flash Modes:
48

Related product manuals