121
Troubleshooting
8
Miscellaneous
The settings are returned to the factory default settings when the camera is turned off.
Possible cause Corrective action Ref. Page
ALL RESET is set to
ON.
Select the SETUP tab in the mode menu and set
ALL RESET to OFF.
P.97
No picture is displayed on the TV when connected to the camera.
Possible cause Corrective action Ref. Page
The video output
signal is incorrect.
Set the video output signal according to the
region where used.
P.107
The camera is not in
the playback mode.
Press quickly twice, or close the lens
barrier and then press to switch to the
playback mode.
P.23, P.79
The TV video signal
setting is incorrect.
Set the TV to the video input mode. P.84
To Next Page
Loading...
