Printing pictures
30
EN
• When printing is finished, the picture selection screen is
displayed. To print another picture, press XY to select a
picture, and press OF/<.
• When you are finished, disconnect the USB cable from the
camera with the picture selection screen displayed.
4 Disconnect the USB cable from the camera.
5 Disconnect the USB cable from the printer.
1 Display the screen being indicated on the right according to Steps 1 and
2 on P. 29, and press .
2 Select [CUSTOM PRINT], and press .
3 Make the print settings according to the operation guide.
You can use [EASY PRINT] even when the camera is turned off or in shooting mode. With the camera
turned off or in shooting mode, connect the USB cable. The selection screen for the USB connection is
displayed. Select [EASY PRINT].
g “EASY PRINT” Step 3 (P. 29), “Other print modes and print settings” Step 2 (P. 30)
Other print modes and print settings (CUSTOM PRINT)
PRINTEXIT
OK
USB
PC
EASY PRINT
CUSTOM PRINT
EXIT
SET
Operation guide
To Next Page
Loading...
Need help?
General
