Button operations
EN
15
Shooting mode: Changing picture brightness
Press OF/< in shooting mode, use the arrow pad to select the frame with
the desired brightness. Press to confirm your selection.
• Adjustable from -2.0 EV to +2.0 EV
Playback mode: Printing pictures
Display a picture to print out in playback mode, connect the camera to the printer, and then press OF/< to
print the picture.
g “Direct printing (PictBridge)” (P. 32)
Press X& in shooting mode to select the macro mode. Press to set.
• The flash and zoom cannot be used in super macro mode.
Press NY in shooting mode to select on or off for the self-timer.
Press to set.
• After setting the self-timer, press the shutter button completely. Then the self-timer lamp lights for
approximately 10 seconds, blinks for approximately 2 seconds, and the shutter is released.
• To cancel the self-timer, press NY.
• Self-timer shooting is automatically canceled after one shot.
Press Y# in shooting mode to select the flash mode.
Press to set.
OF/< button
Changing picture brightness (Exposure compensation)/Printing pictures
X& button Shooting pictures close to the subject
OFF Macro off Cancels macro mode.
& Macro mode This mode lets you shoot from as close as 10 cm/3.9 in. (when
the zoom is set for the zoom-out angle) and as close as 60 cm/
23.6 in. (when the zoom is set for the zoom-in angle) to your
subject.
% Super macro mode This mode lets you shoot from as close as 5 cm/2.0 in. (FE-320/
X-835/C-540)/3 cm/1.2 in. (FE-340/X-855/C-560) to your
subject.
The zoom position is fixed automatically and cannot be changed.
NY button Self-timer shooting
OFF Cancel the self-timer.
ON Set the self-timer.
Y# button Flash shooting
AUTO Flash auto The flash fires automatically in low light or backlight conditions.
! Red-eye This emits pre-flashes for red-eye reduction.
#
Fill-in The flash fires regardless of the available light.
$ Flash off The flash does not fire.
8
F
To Next Page
Loading...
Need help?
General
