83
5
Playback
INDEX - Creating an index
TIPS
•
The index is stored as a still picture in a different record mode from
the original movie.
• The interval between the frames that are automatically picked out
varies depending on the length of the movie.
• An index consists of 9 frames.
• You cannot create an index if there is insufficient memory space on
the card.
Record mode when the Record mode when stored
movie was shot as an index
HQ SQ1 (1024
x
768 pixels)
SQ SQ2 (640
x
480 pixels)
5 Press Ññ to select OK, then press
.
• The 9 frames extracted from the movie appear as
an index display, then the camera returns to the
playback mode. The index is stored as a new
picture.
RESET : If you want to choose different frames,
select RESET, press , and then
repeat from step 3.
CANCEL : To cancel your selections, select
CANCEL and press .
To Next Page
Loading...
