130
5
Using Flash
Press the [OK] button.
● The setting is saved and you
exit the menu screen.
4
Setting the flash brightness (Flash intensity control)
• If the FL-40 external flash is set to "TTL-AUTO" and is used in conjunction
with the built-in flash, the flash intensity is corrected for both flashes at the
same time.
• If the FL-40 external flash is set to "MANUAL" and is used in conjunction
with the built-in flash, only the intensity of the built-in flash is corrected.
• If you use a fast shutter speed, the flash intensity correction may not be
sufficiently effective.
4
To Next Page
Loading...
