83
3
● If you move the cursor to 2.6 ft
(31.5") or less, the indicator
scale automatically changes
to 7.9" - 31.5".
● You can take a picture by
pressing the shutter button at
this point.
Press the [OK] button.
● The setting is saved and "MF"
appears in red on the screen.
●
To cancel manual focusing,
repeat steps 1 and 2 . When
the AF/MF selection screen
appears, press to select
"AF" and then press the [OK]
button.
5
Focusing manually (Manual focus)
Focusing
• When you are using the flash, ensure that the subject for focusing is within
the effective range of the flash.
• Unless you select "OFF" in the "ALL RESET" setting (P.175), this setting will
be cancelled when you switch the camera off.
• The distance indicator on the monitor is only intended as a guide. The
actual distance may vary slightly.
• You cannot change the focus while you are shooting a movie.
To Next Page
Loading...
