34
ADVANCED SHOOTING (Cont.)
● Multi-metering
Meters the brightness of the subject at up to 8 different points to set the
optimal exposure based on the average brightness. Useful with high-contrast
subjects.
1
(In the A/S/M mode)
In the top menu, select MODE MENU T CAMERA T A/S/M T A or S.
2
Press to engage the Spot metering mode.
3
In the top menu, select MODE MENU T CAMERA T MULTI
METERING T ON.
4
Point the AF target mark where you want to meter the exposure. The
subject’s brightness can be metered at up to 8 different points.
● A metering bar appears on the monitor.
● Brightness meter readings are ignored after the 9th reading.
● To cancel the locked Multi-metering exposure, hold down over 1
second to display MEMO . Press it again and release it quickly.
5
Take a picture.
1 C-4040ZBasic-E2 01.7.11 7:33 PM Page 34
To Next Page
Loading...
