22 En
En
SETUP tab
ALL RESET Selects whether to keep the current camera settings
when you turn off the power.
Selects a language for on-screen display.
PW ON/OFF
SETUP
Sets the picture that is displayed on the monitor when the
power is turned on and off.
SCREEN
SETUP
Registers a picture you took to be displayed on the
startup/shutdown screen.
Selects whether the beep sound (used for warnings, etc.)
should be turned on or off.
Adjusts the brightness of the monitor.
Sets the date and time.
VIDEO OUT Selects NTSC or PAL according to your TV’s video signal
type. TV video signal types differ depending on the
region.
Selects the number of frames in the index display.
x215_Basic.book 22 ページ ２００３年１１月２６日 水曜日 午後２時４７分
To Next Page
Loading...
