82
CARD SETUP
ALL-FRAME ERASE
Close the lens barrier and
press the LCD monitor
ON/OFF button to turn on the
LCD monitor.
Press the Menu button several
times to display the screen
shown.
Select using the +/–
buttons and press the OK
button.
• If the Menu button is pressed
while the setting is being
entered, it will be canceled and
the next setting menu will
appear.
Press the OK button again
with YES selected to perform
All-Frame erase.
• When complete, NO PICTURE
appears on the LCD monitor.
• Protected frames will remain in
the card, and the last frame will
be displayed. (p. 75)
• All-Frame erase is also
available in the Index-Display
mode. (p. 74)
4
3
2
1
3
2
1
4
LCD monitor
To Next Page
Loading...
