Setting the resolution
You can set the resolution depending on the image you
print.
Start the application software used to print, and
click [Printer Setup] from the [File] menu.
The [Print Setup] dialog appears.
Set [Printer] to [OLYMPUS P-330], click [Properties]
and then click [Graphics].
Set the resolution to 306 dpi or 153 dpi.
306 dpi is recommended. Set to 153 dpi for a small
image or to print at high speed.
1
2
3
Maximum picture size
• 1376 x 1024 pixels at
306 dpi
• 688 x 512 pixels at 153
dpi
Tip
To print the picture
smaller than 688 x 512
pixels, select 153 dpi.
Printing is performed
more quickly.
Note
You cannot set Dithering,
Intensity and Color in this
dialog.
Click [OK] to close the [Properties] dialog.
Click [OK] to close the [Print Setup] dialog.
4
5
For Windows 95/98
12
To Next Page
Loading...
