Loading the ink ribbon cartridge
Insert the ink ribbon cartridge into the printer.
Use only the ink ribbon cartridge supplied with the
print paper packed in the same carton.
While pressing down the lever, open the cartridge
compartment lid.
1
2
Wind up the ink ribbon to remove the slack.
While pressing the center
of the reel, wind the ink
ribbon in the direction of
the arrow.
Insert the ink ribbon cartridge firmly until it clicks
into place and dose the cartridge compartment lid.
3
Labeled side
Wind the ribbon until
the black line comes
to the left edge.
Getting Started
14
To Next Page
Loading...
