Printing an image recorded by OLYMPUS Digital Cameras
(continued)
Note
Before printing, be sure to
close the lens barrier of
the digital camera.
DIGITAL VISION D-300L/D-200L Digital
Cameras
Check that the printer and digital camera are
turned
off.
Connect the serial port of the printer to the
communication port of the digital camera with the
Macintosh connecting cable (supplied).
1
2
Turn on the printer.
• Make sure that the READY indicator of the
printer turns on.
• Make sure that the control panel of the digital
camera turns on and then goes off after a few
seconds.
3
Macintosh |
connecting cable
(supplied)
to serial port
to communication
port
Printing
22
To Next Page
Loading...
