Olympus Camedia X-450 - Using the Self-Timer

En 29
En
J USING THE SELF-TIMER
This function is useful for taking pictures where you want to be included in the
photograph. Fix the camera securely on a tripod or set it on a level surface for
self-timer shooting.
1 Press the power switch.
• The camera turns on in the shooting mode.
• The lens extends and the monitor turns on.
• The orange lamp lights.
2 Press ( ).
• The self-timer setting screen is displayed.
3 Press to select [ON], and press .
• If not used for about 3 seconds, the camera applies the current
settings, and the setting screen disappears.
4 Take the picture.
• The self-timer lamp lights up for approximately 10 seconds, and starts
blinking. After blinking for approximately 2 seconds, the picture is
taken.
• In the movie mode, press the shutter button again to stop the shooting.
• Press to stop the self-timer once activated.
• The self-timer mode is automatically canceled after one shot.
x450_Basic.book 29 ページ ２００４年８月２日 月曜日 午前９時３６分