30 En
En
J VARYING THE IMAGE BRIGHTNESS
(EXPOSURE COMPENSATION)
This function allows you to make fine changes to the automatic exposure
setting. You can adjust the exposure in the range of ±2.0 in 1/3EV steps.
When the setting is changed, you can check the result on the monitor.
1 Press the power switch.
• The camera turns on in the shooting mode.
• The lens extends and the monitor turns on.
• The orange lamp lights.
2 Press ( ).
• The setting screen for the exposure compensation is displayed.
3 Press to select the exposure compensation value,
and press .
• Select a [ + ] value to brighten the image or a [ – ] value to darken the
image.
• If not used for about 3 seconds, the camera applies the current
settings, and the setting screen disappears.
4 Take the picture.
x450_Basic.book 30 ページ ２００４年８月２日 月曜日 午前９時３６分
To Next Page
Loading...
