EasyManua.ls Logo

Olympus CF Q160S - Channel Plug

Olympus CF Q160S
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 Cleaning, Disinfection and Sterilization Procedures
17
EVIS EXERA GIF/CF/PCF TYPE 160 Series REPROCESSING MANUAL
Water-resistant cap (MAJ-942 for CF-Q160DL/I only)
The water-resistant cap (MAJ-942) is attached to the UPD scope connector on
the endoscope to protect the connector from water penetration during
reprocessing. The water-resistant cap is connected to the endoscope by a chain
(see Figure 3.4).
Figure 3.4
Channel plug (MH-944)
The channel plug is used to plug the openings of the instrument channel port,
air/water and suction cylinders during cleaning (see Figure 3.5).
Figure 3.5
Seal
Thread
Chain
Biopsy valve cap
Cylinder plug

Table of Contents

Related product manuals