Olympus CIX100 - Page 7

- 7 -
Sample Holders
The following table gives an initial indication of which sample holder is
recommended for which application in the CIX100 system.
Article
number
Article code
Short article
description
Examples of application fields
E9701689 HW-CIX-FH-25B
Holder with black
desk for filter
membranes with
25mm diameter
Holders with black background can be used to
inspect all opaque membranes- for example
cellulose nitrate.
The main advantage of the holders with black
background is that they do not have any coating
making them resistant when aggressive solvents
are used.
E9701690 HW-CIX-FH-47B
Holder with black
desk for filter
membranes with
47mm diameter
E9701691 HW-CIX-FH-55B
Holder with black
desk for filter
membranes with
55mm diameter
E9701692 HW-CIX-FH-25W
Holder with white
desk for filter
membranes with
25mm diameter
Holders with white background can be used to
inspect all opaque membranes.
The white coating can be damaged by
aggressive solvents.
The main advantage of the white background
holders is the inspection of woven membranes
without showing artifacts from the holder when
looking through the mesh.
E9701591 HW-CIX-FH-47W
Holder with white
desk for filter
membranes with
47mm diameter
E9701592 HW-CIX-FH-55W
Holder with white
desk for filter
membranes with
55mm diameter
E9701695 HW-CIX-HTL
Holder for tape lift
inspection
Investigation of cleanliness in which the particles
are lifted from the surface with an adhesive tape..
E9701696 HW-CIX-HPT
Holder for particle
trap inspection
Environment analysis by monitoring particles
depositing on a particle trap in a defined time.
The particle traps compatible with CIX100 are not
included.
7