26
2
Connect the earphone to the EAR jack on
the recorder.
After recording is started, you can hear the sound
being recorded through the earphone.
If the earphone is connected, no sound will come
from the speaker.
Recording Monitor
Recording Monitor
If you start recording after inserting the earphone into the EAR jack on the recorder, you can
hear the sound being recorded. The sound volume on the recording monitor can be adjusted
by pressing the VOLUME (+) or VOLUME (–) button.
VOLUME (+)/(–)
button
.............................................................................................................................................................
Notes
• Recording level cannot be controlled using the volume button.
• When using the earphones, do NOT set the volume too high. Listening at very high volume may lead to
hearing loss.
To Next Page
Loading...
