30
2
6
Press the 9 or 0 button adjust
the pause sound level.
The VCVA level can be set to any of 15
different values. The higher the value, the
more sensitive the recorder to sounds. At the
highest value, even the faintest sound will
activate recording.
The VCVA pause sound level can be adjusted
according to the ambient (background) noise.
b Level meter (varies according to the sound volume being recorded)
c Start level (moves to the right/left according to the set level)
7
Press the OK button to finish
settings, then press the 0 button
to close the Menu Screen.
..................................................................................................................................................
Notes
•
The start/stop actuation level also varies depending on the selected microphone sensitivity mode. (☞ P35)
• If the surrounding noise is loud, the starting sensitivity of the VCVA can be adjusted according to the
recording situation.
• To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is
recommended.
6
7
Using the Variable Control Voice Actuator (VCVA)
Press the 9 or 0 button while
the recorder is recording or paused
to adjust the initial VCVA level.
The VCVA level can be set to any of 15
different values. The higher the value, the
more sensitive the recorder to sounds. At the
highest value, even the faintest sound will
activate recording.
The VCVA pause sound level can be adjusted
according to the ambient (background) noise.
b Level meter (varies according to the sound volume being recorded)
c Start level (moves to the right/left according to the set level)
Adjust the initial VCVA level (DS-61)
VCVA Level
Using the Variable Control Voice Actuator
To Next Page
Loading...
