3. How to share the dictation file via Wi-Fi (DS-9500 only)
Send dictation file
Turn the recorder Wi-Fi to [
On
]
From [Device Menu] > [Wi-Fi] > [On/Off], select [On].
• Note that Wi-Fi consumes battery power. If not in use, remember to turn it [
Off
].
Select the access point
From [Device Menu] > [Wi-Fi] > [Select a network], select the access
point to connect to.
• Access points configured in ODMS, and detected access points available for
connection are displayed.
• Enter the password in case the password for selected access point had not been set.
• For connections to smartphones, ensure that tethering is first enabled on the
smartphone. Enter the password configured from your smartphone.
Send the dictation file
¥ After dictation is completed, press
F3
(
SEND
) button.
F3 (SEND) button
To Next Page
Loading...
