To Next PageTo Next PageHow to increase recording level on Olympus DS-5500 Voice Recorder?
If the recording level is too low on your Olympus Voice Recorder, set the microphone sensitivity to the conference mode or close-talking mode and try again.
Why is there no playback tone heard on my Olympus DS-5500 Voice Recorder?
If you can't hear any playback tone on your Olympus Voice Recorder, there are a couple of things to check. If earphones are connected, unplug them to use the internal speaker. If the volume level is set to [00], adjust the volume to a higher level.
How to fix no playback tone on Olympus Voice Recorder?
If no playback tone is heard on your Olympus Voice Recorder, first, unplug the earphones to use the internal speaker. Second, adjust the volume level if it is set to [00].
What to do if unable to erase files on Olympus DS-5500 Voice Recorder?
If you are unable to erase files on your Olympus Voice Recorder, it may be because the file or the SD card is locked. Unlock the file from the file menu or unlock the SD card.
Why Olympus Voice Recorder cannot find the transferred files?
The Olympus Voice Recorder can recognize the DSS file format only.
Why is the recording level too low on my Olympus DS-5500 Voice Recorder?
If the recording level is too low on your Olympus Voice Recorder, the microphone sensitivity might be too low. Try setting the microphone sensitivity to the conference mode.
What to do if my Olympus DS-5500 Voice Recorder is unable to record?
If your Olympus Voice Recorder isn't recording, it might be due to several reasons. The memory might be full, so try erasing unnecessary files or inserting another card. The card might be unformatted, so you should format it. You might have reached the maximum number of files, so switch to another folder. The file or the SD card might be locked, so unlock them.
What to do if my Olympus DS-5500 is unable to set index marks?
If your Olympus Voice Recorder is unable to set index marks, it might be because you've reached the maximum number of index marks (32). Try erasing unnecessary index marks. Also, the file or SD card might be locked, so unlock them.
How to fix recording level being too low on Olympus DS-5500?
If the recording level is too low on your Olympus Voice Recorder, the microphone sensitivity may be too low. Set the microphone sensitivity to the conference mode and try again.
Why is my Olympus DS-5500 Voice Recorder unable to erase files?
If your Olympus Voice Recorder is unable to erase files, it could be because: * The file is locked; unlock the file from the file menu. * The SD card is locked; unlock the SD card.
General| Brand | Olympus |
|---|---|
| Model | DS-5500 |
| Category | Voice Recorder |
| Language | English |
Overview of the recorder's key capabilities and functionalities.
Explains the icons and indicators shown on the recorder's LCD screen.
Instructions for charging the recorder using a USB cable and a PC or AC adapter.
Steps to charge the recorder by connecting it to a computer via a USB cable.
How to charge the device using an optional USB AC adapter.
Procedure for charging the recorder using the docking station and AC adapter.
Information and cautions specific to using Ni-MH rechargeable batteries.
Instructions for powering the recorder using the AC adapter.
How to power the recorder using a USB cable connection.
Steps to properly power down the digital voice recorder.
Details on compatible memory card types and capacities for the recorder.
Step-by-step guide on how to insert and remove SD cards.
How to configure the recorder for the type of batteries installed.
Instructions for setting the recorder's internal clock and date.
Explains the different record modes: Append, Overwrite, and Insert.
Steps for creating and starting a new voice recording.
Procedure for recording over existing audio content.
How to insert new audio into an existing recording.
Guide to setting up and using the recorder for hands-free operation.
How to listen to a recording while it is in progress.
Details on functions like Fast Forward, Rewind, Cue, Review, and Playback Speed.
Instructions for deleting single files or all files in a folder.
How to erase specific sections within an audio file.
Steps to navigate and select different folders for recordings.
How to choose a specific file for playback or other operations.
Procedure to assign an Author ID to recordings.
How to set and manage Work Type information for files.
How to add vocal annotations or instructions to recordings.
Steps to remove existing verbal comments from a file.
How to place index marks within audio files.
Procedure to erase index marks from audio files.
Options related to file management like Priority, Pending, File Lock, Work Type.
Settings for microphone sensitivity, recording mode, and VCVA.
Settings for backlight, contrast, LED, beep, and language.
Options for memory selection, cue/rev, power save, time/date, battery, USB class, reset, format.
Setting default values for recorder menu items.
Customizing user authorization, splash message, slide switch guide, alarm, display.
Settings for PIN code, device lock, and password mismatches.
Managing author IDs, priority levels, and default author selection.
Customizing work types, optional items, and default work type selection.
Customizing folder settings like name, number, and work type.
Customizing recording settings like format and record function.
Changing functions for smart buttons, NEW, and slide switch.
Customizing settings for hands-free operation with foot switch.
Overview and features of the management software.
System requirements for installing and running the software.
How to access and use the software's online help resources.
Step-by-step guide for connecting the recorder to a PC via USB.
How to connect the recorder to a PC using the docking station.
Safe procedures for disconnecting the recorder from a PC.
Instructions for starting/disabling the software on Windows.
Instructions for starting/disabling the software on Macintosh.
