Olympus DS-5500 - Partially erasing a file

2
30
EN
Erasing
134 /
134
EXIT
MIKE
45 M 02 s
01H 55 M 23s
Erase start
QPDICT Ni
134 /
134
EXIT
MIKE
45 M 01 s
QPDICT Ni
01H 55 M 23s
Start point
134 / 134
EXIT
MIKE
01 H 30 M 32 s
01H 55 M 23s
End point
QPDICT Ni
134 /
134
INSERT
SPEED
INDEX
MIKE
45 M 02 s
01 H 55M 25s
QPDICT Ni
2
3
Erasing
Partially erasing a file
1 Playback the file you would like to
partially erase.
2 Press the ERASE button at the point you
want to start erasing.
• Whileplaybackcontinues,[EraseStart]will
appearonthedisplay.
• IfyoupresstheF2(
)button,playbackwill
skip(F.Skip)totheendofthefileandthen
stop.IncaseofaVerbalcomment(☞P.36)
beforetheendofthefile,thatpointwillbe
setautomaticallyastheendingpointofthe
partialerase.
• IfyoupresstheF1(
)button,playbackwill
skipback(B.Skip)andrestartfromthepartial
erasestartingpoint.
 Playbackwillcontinueuntiltheendofthe
fileoruntilthepartialeraseendingpointis
confirmed.
Anyunnecessarypartofafilecanbeerased.
3 In the position you want to end partial
erase, press the ERASE button again.
• Theerasestartingpoint(time)setinstep2
andtheendingpoint(time)setinthisstepwill
bedisplayedalternativelyfor8seconds.
• Ifyoulettheplaybackcontinueuntiltheend
ofthefile,orincaseofaVerbalcomment
(☞P.36)beforeit,thatwillbeconsideredthe
endingpointofthepartialerase.