Olympus DS-5500 - Verbal Comment; Setting a Verbal Comment; Clearing a Verbal Comment

36
3
EN
Verbal Comment
029 / 030
VERBAL
DISPLY
INDEX
MIKE
10 M 56 s
Verbal Comment
22M 40 s
E F
QPDICT Ni
029 / 030
INSERT
SPEED
INDEX
MIKE
10 M 56 s
Verbal Comment
22M 40 s
QPDICT Ni
Verbalcommentsareusefultoappendvocal
instructionswhilerecording.
ItispossibletosearchandplaybackVerbal
commentsusingtheODMSandDSSPlayersoftware.
Verbalcommentsarealsousefultogiveinstructions
totranscriptionists.
Setting a Verbal Comment
1 While the recorder is in recording mode,
press and hold the F1(VERBAL) button.
• DatarecordedwhilepressingtheF1(VERBAL)
buttonwillberecordedasVerbalComment.
Locating a Verbal Comment
1 When playing back a file, press and hold
the 9 or 0 button.
• Therecorderstopsfor1secondwhenit
reachestheVerbalComment.
Clearing a Verbal Comment
1 WhenplayingaVerbalComment,press
the ERASE button.
2 Press the +buttontoselect[Clear], then
press the OK/MENU button.
Notes
• Upto32Verbalcommentscanbesetwithinafile.
• Whenafileislockedorsettoread-only,orwhen
theSDcardislocked,Verbalcommentscannotbe
erased.
• WhentherecorderhasbeensettoDSSClassic
mode,itisnotpossibletorecordVerbal
Comments.
Verbal Comment