Olympus DS-5500 - Index marks; Setting an index mark; Clearing an index mark

37
3
EN
Index marks
029 / 030
INSERT
SPEED
INDEX
MIKE
3H 10 M 56 s
Index 01
Set
QPDICT Ni
029 / 030
INDEX
MIKE
3H 10 M 56 s
22M 40 s
Index 01
QPDICT Ni
Indexmarkscanbeplacedintoafileduring
recordingorplayback.Indexmarksareusedto
provideaquickandeasywaytoidentifyimportantor
significantpartswithinthefile.
Setting an index mark
1 While the recorder is in recording mode
or in playback mode, press the
F3 (INDEX) button.
• Anindexnumberwillappearonthedisplay
andthestatusindicatorlightwillstart
flashing.
Locating an index mark
1 While playing back a file, press and hold
the 9 or 0 button.
• Therecorderstopsfor1secondwhenit
reachestheindexmark.
Clearing an index mark
1 Selectafileinwhichindexmarksyou
want to erase are contained.
2 Press the 9 or 0 button to select
the index mark to erase.
3 While the index number appears for
approximately 2 seconds on the display,
press the ERASE button.
• Theindexmarkiserased.
Notes
• Upto32indexmarkscanbesetwithinafile.
• Whenafileislockedorsettoread-only,orwhen
theSDcardislocked,indexmarkcannotbe
erased.
• IftherecorderhasbeensettoDSSClassicmode,
indexmarksarelimitedtoamaximumof16for
eachfile.
Index marks