Olympus DS-5500 - Setting battery type and time;date; Setting battery type [Battery]; Setting time and date [Time & Date]

20
1
EN
Setting battery type and time/date
BACK EXIT
Time & Date
10 M 14 D 2013 Y
5: 00 PM
24H
BACK EXIT
Time & Date
10 M 14 D 2013 Y
5 : 45 PM
24H
When you use the recorder for the first time
after purchasing it, or when the batteries
have been inserted without the device
being used for a long time, the battery
type setting screen and the time/date
setting screen will appear. Also, the battery
type setting screen will appear after the
batteries are replaced.
However,whenaPasswordhasbeenset
asthedevicelockfunction(☞ P.34), the
recorder will go to the battery type setting
screen and the time/date setting screen
afterverification(unlocking).
2 Press the + or −buttontoselect[Ni-MH]
or[Alkaline].
[Ni-MH]:
SelectwhenNi-MHrechargeablebatteriesare
used.
[Alkaline]:
Selectwhenalkalinebatteriesareused.
• Thesettingstatuswillappearonthedisplayas[
Ni
]
(Ni-MH)or[
Al
](alkaline).
3 Press the OK/MENU button to complete
the setting.
• Thetime/datesettingscreenmayappearafter
displayingmessage[SetTime&Date].Inthis
case,followthestepsgivenin“Settingtime
anddate[Time&Date]”.
Setting time and date [Time & Date]
Ifyousetthetimeanddatebeforehand,the
informationwhenthefileisrecordedisautomatically
storedforeachfile.Settingthetimeanddate
beforehandenableseasierfilemanagement.
1 Press the 9 or 0 button to select
the item to set.
Setting battery type and time/date
OK/MENU button
+, − button
9, 0 button
F1, F2, F3 button
Selecttheitemfromthe
“hour”,“minute”,“year”,
“month”and“day”witha
flashingpoint.
Youcanselectbetween12and
24hourdisplaybypressing
theF2(24H)buttonwhile
settingthehourandminute.
Setting battery type [Battery]
1 Turnontherecorder(☞ P.18).
• Thebatterytypesettingscreenwillappear
afterdisplayingmessage[Please select
Battery].
BACK EXIT
Battery
Ni-MH
Alkaline
2 Press the + or − button to set.
• Youcanselecttheorderofthe“Month”,“Day”
and“Year”bypressingtheF2(D/M/Y)button
whilesettingthem.