Olympus DS-5500 - Page 21

21
1
EN
Setting battery type and time/date
Setting time and date
BACK EXIT
Device Menu
Memory Select
Cue/Rev
Power Save
Time & Date
Battery
USB Class
3 Press the OK/MENU button to complete
the setting.
• Theclockwillstartfromthesetdateandtime.
PresstheOK/MENUbuttonaccordingtothe
timesignal.
Notes
• Movingtheslideswitchtoapositionotherthan
STOP(4)whilesettingthetimeanddatewill
cancelthetimeanddatesetting.Therecorderwill
returntotheprevioustimeanddate.
• YoucansetthetimeanddatefromyourPCusing
ODMSandDSSPlayersoftware(☞P.47 ).
Changing the time and date
Ifthecurrenttimeanddateisnotcorrect,setitusing
theprocedurebelow.
1 While the recorder is in stop mode, press
the OK/MENU button.
2 Press the + or −buttontoselect[Device
Menu].
3 Press the OK/MENU button.
4 Press the + or − button to select
[Time & Date].
5 Press the OK/MENU button.
• ThefollowingstepsarethesameasStep1
throughStep3of“Settingtimeanddate
[Time&Date]”(☞P. 20).
6 Press the F3 (EXIT) button to close the
menu screen.