Memory card
Memory card
Inserting and ejecting a SD card
Inserting a SD card
InserttheSDcardfullyintothecardslot
with the card facing the direction shown
in the illustration below, until it clicks into
place.
• Insert the card keeping it straight.
Card recognition
Notes
• Inserting the card the wrong way or at an angle
could damage the contact area or cause the
cardtojam.
• If the card is not inserted all the way into the
slot, data may not be written properly.
• Whenanunformattedcardisinsertedintothe
cardslot,therecorderwillautomaticallydisplay
theformatmenuoptions(☞P.45).
• Useonlycardsformattedwiththerecorder
(☞P.45).
• Neverremovethecardwhiletherecorderis
operating,asthismaydamagethedata.
• Afterpushingthecardinwardtoejectit,releasing
yourfingertooquicklymaycausethecardtobe
ejectedunexpectedly.
• Therecordermaynotproperlyrecognizethecard
evenwhenthatcardiscompatiblewithit.
• Theprocessingperformancereducesinacard
whenyourepeatwritinganddeleting.Inthiscase,
formatthecard(☞P.45).
AfterinsertingSDcard,themessage
[Please Wait]willflashonthedisplaywhile
therecorderrecognizestheSDcard.
Ejecting a SD card
PushtheSDcardinwardtounlockitandlet
it come out of the slot.
• Holdthecardstraightandpullitout.