Olympus DS-5500 - New recording

2
23
EN
Recording
031 / 030
FOLDER
PRIOR
INFO
MIKE
New File
EF
Remain
15 H 22 M 40 s
QPDICT Ni
b
c
a
031 /
031
VERBAL
DISPLY
INDEX
MIKE
E F
00 M 10 s
15 H 22 M 30 s
QPDICT Ni
031 /
031
FOLDER
PRIOR
INFO
MIKE
02 M 20 s
15 H 02 M 20 s
QPDICT Ni
3
Recording
1
2
2
New recording
Createanewfiletorecordin.
1 Press the NEW button to create a new
file.
• ItispossibletoselecttheWorkTypefrom
theworktypelistuploadedusingtheODMS
software(☞P.47).
aSelectedAuthorID
bNewfilenumber
cRemainingrecordingtime
2 Move the slide switch to the REC(s)
position to start recording.
• Theredstatusindicatorlightturnson.Turn
themicrophoneinthedirectionofthe
sourcetoberecorded.Whenyoupressthe
F2(DISPLY)buttonduringrecording,youcan
changethescreendisplays.
3 Move the slide switch to the STOP(4)
position to stop recording.
• Ifyouwanttoappendadditionalrecordings
tothesamefile,movetheslideswitchtothe
REC(s)positionagain.
Notes
• Duringrecording,abeepwillsoundwhenevertheremainingrecording
timereaches60,30,and10seconds.
• Whentheremainingrecordingtimereaches60seconds,thestatus
indicatorlightwillstartflashing.Thelightwillflashfasterwhenthe
remainingrecordingtimedecreasesfrom30to10seconds.
• [MemoryFull]or[FolderFull]willbedisplayedwhenthememoryor
foldercapacityisfull.
−
Deleteunnecessaryfilesbeforerecordinganyfurther(☞P.29)ortransfer
dictationfilestoyourPC(☞P. 49).
− Changetherecordingmediaat[MemorySelect]setting( ☞ P.42)or
changetoacardwithfreespace.