Olympus DS-5500 - Device lock function

34
3
EN
Device lock function
Enter Password
Enter Password
Enter Password
ENTER
Enter Password
Device is
Locked
09 : 59
Accesstotherecordercanberestrictedbyusingthe
DeviceLockfunction.Passwordauthenticationcan
besaferforyourdataincasetherecorderislost.
ThepasswordcanbesetbyusingtheODMS
software(☞P.47).
Whenthepasswordhasbeenregistered,youwillbe
askedforitonstart-up.
1 Usethe+, –, 9 or 0 buttons to
select a number.
2 Press the OK/MENU button to set a
number.
• A[* ]willappearintheselectedfirstdigitand
theflashingcursorwillmovetothenextone
over(totheright).Repeatsteps1and2to
enterallfourdigits.
• PressingtheERASEbuttonatanytimewill
erasethelastentryandmovethecursortothe
previousentry(totheleft).
3 After all four digits have been entered,
press the F2(ENTER) button.
• Ifthe4digitnumberenteredmatchesthe
registeredpasswordthenthestart-up
messagewillappearandtherecorderwill
start-up.
Authentication halt mode
Ifthepassworddoesnotmatchafterfive
consecutivetries,therecorderwillenterinto
authenticationhaltmodefortenminutes.
Aftertenminutesthepasswordhistorywill
bedeleted,andtherecorderwillreturntothe
passwordinputscreen.
Device lock function
• ThedefaultpasswordwhenusingtheODMS
softwaretosetthepasswordforthefirsttime
is“0000”.