Olympus DS-5500 - Device Menu

42
3
EN
Menu items
Menu items
Battery
Youcansetthetypeofbatteriesusedwiththe
recorder.
Fordetails,see“Settingbatterytype[Battery]”
(☞P. 20).
USB Class
YoucansettheUSBclassoftherecorderdepending
ontheintendeduse.
[Composite]:
Inthe3classesofStorage,USBaudioandhuman
interfacedevice,USBconnectionispossible.While
connectedviaUSBin[Composite],therecorder
canbeusedastheUSBspeakerandtheUSB
microphoneinadditiontostorageclass.
[StorageClass]:
USBconnectionispossibleinonlystorageclass.
Reset Settings
Youcanresetthemenusettingstotheirdefault
values.
[Start]:
Themenusettingswillbereset.
[Cancel]:
Theresetwillbecanceled.
• Evenifthesettingsarereset,thetimesettingsand
filenumberswillnotreturntotheirinitialsettings.
Thesettingsbeforetheresetwillbepreserved.
Format
Youcanformatthebuilt-inmemoryorSDcardused
withtherecorder.
• Formattingwilleraseallthestoreddataincluding
lockedfiles.
Fordetails,see“Formattingthememory[Format]”
(☞P.45).
Memory Info.
Memorycapacityandremainingmemoryspace
forthebuild-inmemoryandSDcardinusewillbe
displayed.
System Info.
Systeminformationabouttherecorderlikethe
[Model],[Version]and[SerialNo.]canbedisplayed.
Device Menu
Memory Select
Youcanswitchtherecordingmediabetween[Built-
in Memory]and[SDCard](default).
• Therecordingmediawillappearonthedisplayas
[
]or[ ].
Cue/Rev
TheplaybacksoundofCueandReviewoperation
andCueandReviewspeedcanbeset.
1 Select[Sound]or[Speed].
[Sound]:
SettheplaybacksoundofCueandReviewto
OnorOff.
[Speed]:
SettheCueandReviewspeed.
2 Selecttheoptions.
When[Sound]isselected:
[On]:
ActivatetheplaybacksoundofCueand
Review.
[Off]:
Disablesthisfunction.
When[Speed]isselected:
 YoucanadjusttheCueandReviewspeedlevel
from[Speed1]to[Speed5].
• CueandReviewspeedlevelbecomesfasteras
thenumericalvaluebecomeslarger.
Power Save
Bydefault,therecorderwillenterintoPowerSave
modeifnotusedformorethan10minutes.
[5minutes][10minutes][30minutes][1hour]:
 Setthelengthoftimebeforetherecorderwill
enterintoPowerSavemode.
[Off]:
Disablesthisfunction.
• Ifanybuttonispressed,timecountwillrestart.
Time & Date
Settingthetimeanddatebeforehandenableseasier
filemanagement.
Fordetails,see“Settingtimeanddate
[Time&Date]”(☞P. 20).