Olympus DS-5500 - Power supply from AC adapter or USB cable; Using the AC adapter; Using the USB cable

17
1
EN
Power supply from AC adapter or USB cable
Power Supply
Error
Remove
Power Plug
UsetheACadapterorUSBcablewhenrecordingfor
extendedperiodoftime.
The"Standard"versionoftheDS-5500doesnot
includethedockingstationandtheACadapter
(optional).
Using the AC adapter
Plug the AC adapter into a household
power outlet and connect the power plug
to the recorder via the docking station.
• Always turn off the recorder before you
connect power.
Detecting abnormal voltage
IftherecorderdetectsaDCpowervoltage
outsidetheallowedvoltagerange(4.5-5.5V),
then[PowerSupplyErrorRemovePower
Plug]willappearonthedisplay,andall
operationwillstop.Therecorderwillnotbe
operableifabnormalvoltageisdetected.Stop
useoftherecorder.
Power supply from AC adapter or USB cable
Using the USB cable
1 Verifythattherecorderisinstopmode.
2 ConnecttheUSBcabletotherecorder
while pressing the OK/MENU button.