Olympus DS-5500 - Setting the Author ID and Work Type; Setting an Author ID; Setting the Work Type

35
3
EN
Setting the Author ID and Work Type
EXIT
Author ID
AUTHOR A
AUTHOR B
AUTHOR D
AUTHOR E
AUTHOR F
AUTHOR C
EXIT
E
031/030
Ni
Work Type 1
Work Type 2
Work Type 3
Work Type 4
Work Type 5
Work Type 6
Everyfilerecordedontherecorderwillinclude
theAuthorIDandWorkTypeaspartofitsheader
information.TocreatemultipleAuthorIDsand
WorkTypesontherecorder,usethebundledODMS
softwaretocreateanduploadadatalist(listof
AuthorIDsandWorkTypes)totherecorder.Formore
details,refertotheonlinehelpforODMSsoftware
(☞P. 50).
BydefaulttheAuthorIDissetto“DS5500”.
Setting an Author ID
1 TurnONtherecorder.
• When[PromptforauthorIDatPower-on.]
hasbeensetthroughODMSsoftware(☞P.47),
theregisteredAuthorIDlistwillappear.
2 Press the + or – button to select the
AuthorIDthatyouwanttoassigntothe
recorderfromtheIDlist.
3 Press the OK/MENUbuttontosettheID.
• WhenmorethanoneAuthorIDexists/is
registeredontherecorder,theIDlistwillbe
displayed.
Note
• Upto10AuthorIDentriescanberegistered(upto
amaximumof16characters).
Setting the Work Type
Upto20WorkTypescanberegisteredanduploaded
totherecorderusingtheODMSsoftware.EachWork
Typecanhaveupto10optionalitemsassociated
withit.WorkTypesandOptionalItemscanbe
usedontherecordertopopulatethefileheader
information.RefertotheODMSsoftwareonlinehelp
forregistering/settingupOptionalItemsthroughthe
ODMSsoftware(☞P.50).
TheWorkTypeinformationoftherecordedor
uploadedfilescanbeeditedwiththemenusettings
oftherecorder(☞P.43).
1 While the recorder is in stop mode,
press the NEW button.
• When[PromptforWorktypeIDonnew
recordings.]hasbeensetthroughODMS
software(☞P.47),theWorkTypesuploadedto
therecorderwillappearinalist.
2 Press the + or – button to select a Work
TypefromtheWorkTypelist.
3 Press the OK/MENU button to set the
WorkType.
• TheselectedWorkTypeandamaximum
of10OptionalItemsassociatedtoitcanbe
recordedasfileheaderinformation.
• ItispossibletoaddanextraValuetothe
OptionalItemslistoftheselectedWork
Type.Inordertodoso,gototheWorkType
informationscreen(☞P.43).Formoredetails,
refertotheonlinehelpforODMSsoftware
(☞P. 50).
Setting the Author ID and Work Type