Olympus DS-5500 - Using the hold function

32
3
EN
Using the hold function
POWER HOLD
Using the hold function
SlidethePOWER/HOLDswitchtothe[HOLD]
positiontoputtherecorderintotheholdmode.
Duringtheholdmode,allbuttonoperationsare
locked.
Notes
• Ifanybuttonispressedduringthehold
mode,currentdateandtimeisdisplayedfor
approximately2seconds.
• IfthePOWER/HOLDswitchisslidtothe[HOLD]
positionduringrecordingorplayback,button
operationsarelocked,buttherecordingor
playbackcontinuestotheend.
Exiting the hold mode
SlidethePOWER/HOLDswitchbacktothedefault
position.