38
En
Transferring images to a computer
Identifying the OS
Downloading image files
Disconnecting the camera from the computer
¥
¥
*1 Even if your computer has a USB connector or IEEE1394 connector, data transfer may not function
correctly if you are using one of the operating systems listed below or if you have an add-on USB connector
or IEEE1394 connector (extension card, etc.).
● Windows 95/NT 4.0
● Windows 98/98 SE upgrade from Windows 95
● Mac OS 8.6 or lower
● Data transfer is not guaranteed on a home-built PC system or PCs with no factory installed OS.
*2 IEEE1394 functionality is assured on Macintosh computers using Mac OS 9.1 - 9.2 or Mac OS X.
*3 The provided IEEE1394 cable has one end with 4 pins to be connected to the camera and the other end
with 6 pins to be connected to the port on the computer.
Windows 98/98 SE
Windows Me/XP/2000
Mac OS 9.0 - 9.2/OS X
*2
Using USB
*1
Confirming the computer has recognized the camera
¥
¥
¥
¥
¥
¥
¥
¥
Connecting the camera to the computer
using the USB cable or IEEE1394 cable
*3
Installing the USB driver
Connecting the USB cable to the computer
¥¥
1 E-1 Ba-EN P1 03.7.8 5:56 PM Page 38
To Next Page
Loading...
