15
LET’S TAKE A TOUR OF YOUR E-3
In this section we will give you a quick tour of your camera. In
later sections, each dedicated to a particular feature, we will go
“in-depth” to fully discuss the various features and options
offered by the camera as well as detailing how to customise any
given feature or operation.
First, however, let’s start a “walk around” tour of the buttons and
dials.
When viewing the camera
from the top, with the lens
facing forwards, the three
buttons to the left of the
viewfinder each control the
adjustment of one of two
functions depending which
input wheel (situated in front
of the shutter button or
below the large LCD display)
is rotated.
As it arrives from the
factory, depressing any
given button will change the
function shown on the
button if the rear input
wheel (under the LCD display) is turned. If the front input wheel
(under the shutter button plinth) is turned while pressing any
given button, then the item shown on the marking on the
viewfinder housing (to the right of the actual button itself) will be
adjusted.
Another way to think of this is that the wheel under the LCD
display is to the “left” of the shutter button (i.e. It changes the
To Next Page
Loading...
Need help?
General
Weight and Dimensions
